Zero Water LED Rapid Exit Taxiway Indicator Light (8-inch 6mm)

Rapid exit taxiway indicator lights are used in the rapid exit taxiway indicator system, set at prescribed distances along one side of the runway centerline to give a landing aircraft advance notice that it is approaching a rapid exit taxiway. The continuous yellow light signal helps pilots judge the direction and distance of the exit and adjust roll-out speed accordingly, which improves the efficiency of runway exits. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal.

Features

• The serialized design of lighting fixtures and modular design of components effectively reduce the inventory of spare parts.
• The upper cover is made of forged aluminum alloy, high strength, good fatigue resistance combining excellent corrosion resistance and heat dissipation properties.
• Prism sealing sleeve with multi-layer waterproof sealing structure design and easy to replace.
• Low energy LED light source, with a comprehensive lifespan of not less than 100,000 hours and light attenuation is less than 30%.
• Strict LED color management ensures a high degree of consistency in the chromaticity output of lighting fixtures.
• The dimming curve complies with the requirements of FAA EB67, and the dimming characteristics of the luminaire are similar to those of traditional halogen light source luminaires.
• The integrated surge protection device features high surge withstand capability, compliant with FAA EB67. It has successfully undergone 1.2/50μs - 8/20μs combination wave testing per ANSI/IEEE C62.41, withstanding 10kV peak open-circuit voltage and 5kA peak short-circuit current surges.
• The overall degrees of protection is IP68, capable of withstanding an internal pressure of 138KPa or the water pressure generated by the impact of aircraft tires on the window.
• Optional fault detection function, which can achieve light fault open circuit in case of light source or drive failure.
• Optional specialized arctic kits.
• The rated light beam output and heating function can be remotely configured through a set of CCR light level encoding instructions.