Complete Airfield Ground Lighting Solutions

Recommended APPZ-12-LED Zero Water LED Approach Centerline and Crossbar Light (12-inch 6mm) A 12-inch unidirectional in-pavement fixture designed specifically for precision approach lighting systems, usable as an approach centerline light or as a crossbar light, giving aircraft clear, dependable visual guidance during approach and landing at night and in low visibility. Used as an approach centerline light, the fixtures are set along the extended runway centerline and indicate the direction of the runway center with a continuous, conspicuous light signal, helping pilots establish and hold the approach path accurately. Used as a crossbar light, the fixtures are set perpendicular to the approach centerline and form a distinct lateral light marking that gives pilots a direct position and distance reference, helps them judge where the aircraft is relative to the runway centerline and the runway threshold, and improves visual recognition during the approach. The fixture uses a unidirectional light distribution, and its photometric performance meets the relevant requirements of ICAO Annex 14, Volume I, providing steady, clear and readily identifiable light guidance throughout the precision approach; it is used in airport runway approach lighting systems. Recommended APSZ-12-LED Zero Water LED Approach Side Row Light (12-inch 6mm) Approach side row lights are used in the side rows of a precision approach lighting system, normally set on both sides of the approach centerline to establish a clear lateral position reference for the aircraft. They work with the approach centerline and crossbar lights to help pilots judge where the aircraft is relative to the runway centerline, and they strengthen recognition of the approach lighting pattern in low visibility. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended RCLZ-08-LED Zero Water LED Runway Centerline Light (8-inch 6mm) Runway centerline lights are used in the runway centerline lighting system, set along the runway centerline to give aircraft continuous directional guidance during takeoff, landing and the roll along the runway. The fixtures form a clear runway center reference that helps pilots hold the correct heading at night and in low visibility and identify the remaining section of runway. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended TDZZ-08-LED Zero Water LED Touchdown Zone Light (8-inch 6mm) Touchdown zone lights are used in the runway touchdown zone lighting system, set in pairs on both sides of the runway centerline to mark the touchdown area of a precision approach runway. The regular pattern of white lights gives pilots a definite longitudinal distance and lateral position reference, which helps them judge the touchdown point and complete a stable landing. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended RELZ-12-LED Zero Water LED Runway Edge Light (12-inch 6mm) Runway edge lights mark the boundaries on both sides of the runway; set continuously along the runway edges, they give aircraft runway outline guidance during takeoff, landing and the roll along the runway. The lights help pilots identify the width, direction and usable extent of the runway at night and in low visibility, and keep the aircraft operating safely within the runway. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended THRZ-12-LED Zero Water LED Runway Threshold Light (12-inch 6mm) Runway threshold lights mark the position of the runway threshold; set along the threshold line, they show a clear green light signal in the direction of approach. They help pilots identify exactly where the runway available for landing begins, and together with the approach lights, the runway edge lights and others they make up the complete visual marking of the runway threshold. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended THWZ-12-LED Zero Water LED Runway Threshold Wing-bar Light (12-inch 6mm) Runway threshold wing-bar lights are used in the runway threshold wing-bar system, set at both ends of the runway threshold lights and extending outward to widen the lateral visual extent of the threshold. At night and in low visibility the lights bring out the position and the width of the runway threshold, so pilots establish a threshold reference quickly. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended ENDZ-12-LED Zero Water LED Runway End Light (12-inch 6mm) Runway end lights mark the end of the usable runway; set along the runway end line, they show a red light signal toward the runway. They give aircraft taking off, landing or rolling along the runway a definite indication of where the runway stops, helping pilots judge how much usable runway is left. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended TAEZ-12-LED Zero Water LED Runway Threshold/End Light (12-inch 6mm) Runway threshold/end lights are used where the runway threshold and the runway end coincide or have to be shown together; different light distributions in the two directions let one fixture perform both the threshold and the end marking functions. The fixture marks the runway threshold toward the approach direction and the runway end toward the runway, which cuts the number of units needed where the two are co-located while keeping the lights clearly identifiable. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended RAPZ-08-LED Zero Water LED Rapid Exit Taxiway Indicator Light (8-inch 6mm) Rapid exit taxiway indicator lights are used in the rapid exit taxiway indicator system, set at prescribed distances along one side of the runway centerline to give a landing aircraft advance notice that it is approaching a rapid exit taxiway. The continuous yellow light signal helps pilots judge the direction and distance of the exit and adjust roll-out speed accordingly, which improves the efficiency of runway exits. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended RELRZ-08-LED Zero Water LED Runway Entrance Light (8-inch 6mm) Runway entrance lights are used in the runway status light system; an automatically displayed red light warns pilots and vehicle drivers that the runway is occupied or that entering it carries risk. Working with the airport surveillance and control systems, the fixtures put a direct, conspicuous visual warning at critical positions, reducing the risk of runway incursions and conflicts. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal. Recommended TCLZ-08-LED Zero Water LED Taxiway Centerline Light (8-inch 6mm) Taxiway centerline lights serve the taxiway centerline lighting system. They are laid continuously along the taxiway centerline and around curves to give aircraft directional guidance while taxiing on the ground. The lights help pilots pick out the taxi route, its curves and its exits at night and in low visibility, keeping the aircraft on the assigned path. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal.