Zero Water LED Runway Edge Light (12-inch 6mm)

Runway edge lights mark the boundaries on both sides of the runway; set continuously along the runway edges, they give aircraft runway outline guidance during takeoff, landing and the roll along the runway. The lights help pilots identify the width, direction and usable extent of the runway at night and in low visibility, and keep the aircraft operating safely within the runway. The fixture uses an LED light source and a light distribution designed for the application; its photometric performance is aligned with the requirements of the corresponding airfield lighting system, giving airport operations a steady, clear and easily identified visual signal.

Application/Use

Features

• The serialized design of lighting fixtures and modular design of components effectively reduce the inventory of spare parts.
• The upper cover is made of forged aluminum alloy, high strength, good fatigue resistance combiningexcellent corrosion resistance and heat dissipation properties.
• Prism sealing sleeve with multi-layer waterproof sealing structure design and easy to replace.
• Low energy LED light source, with a comprehensive lifespan of not less than 100,000 hours and lightattenuation is less than 30%.
• Strict LED color management ensures a high degrees of consistency in the chromaticity output oflighting fixtures.
• The dimming curve complies with the requirements of FAA EB67, and the dimming characteristics ofthe luminaire are similar to those of traditional halogen light source luminaires.
• The integrated surge protection device features high surge withstand capability, compliant with FAA EB67. It has successfully undergone 1.2/50μs - 8/20μs combination wave testing per ANSI/IEEE C62.41, withstanding 10kV peak open-circuit voltage and 5kA peak short-circuit current surges.
• The overall degrees of protection is IP68, capable of withstanding an internal pressure of 138KPa or thewater pressure generated by the impact of aircraft tires on the window.
• Optional fault detection function, which can achieve light fault open circuit in case of light source ordrive failure.
• Optional specialized arctic kits.
• The rated light beam output and heating function can be remotely configured through a set ofCCRlight level encoding instructions.