Cable Connectors

PLG2 & REC9 are molded elastomer waterproof connectors made specifically for airfield lighting systems, for the electrical joint between the airfield primary cable and the primary side of an isolation transformer. Their one-piece construction cuts the number of steps and makes installation quick, which suits maintenance carried out without suspending flight operations, fast reconnection after a fault and emergency repair, and markedly raises the efficiency of airport maintenance. A crimped metal conductor is built into the tail of the lead, so cable can be joined quickly in the field as outdoor airport work requires; waterproof insulating tape and heat-shrink tubing are supplied as standard and a locking device is optional, giving resistance to water and damp, to high and low temperature, to dust and to vibration, which meets the demanding conditions of an exposed airfield, alternating temperatures and equipment under continuous vibration. The product is certified by the CAAC and meets FAA standard requirements.

PLG4 & REC11 are tool-free secondary connectors developed for the output side of fixtures and isolation transformers, and they install easily. Silicone grease inside the connector lubricates the joint and eases assembly, and the connectors are safe and reliable in use; they are in service on airport projects worldwide, with more than 10 years of accumulated service. The product is certified by the CAAC and meets the relevant standards of the United States Federal Aviation Administration (FAA).

PLG6 and REC7 are one-piece molded elastomer waterproof connectors, used mainly for the electrical connection between the airfield lighting secondary cable and the secondary side of an isolation transformer. The one-piece design simplifies assembly on site, and the waterproof heat-shrink wiring method is quick and easy to work with, which suits emergency repair of airport equipment as well as routine maintenance. The product is certified by the CAAC and meets the certification requirements of the United States Federal Aviation Administration (FAA).

PLG13 & REC14-R resin-filled connectors are developed for demanding construction sites and are a highly reliable, highly secure solution for primary cable joints in the industry. A multi-layer waterproof structure gives them strong insulation performance; once the resin inside has cured it forms a permanent, dependable bond in which connector and cable become one piece, so the connection cannot be taken apart. The product is certified by the CAAC and also meets the relevant standards of the United States Federal Aviation Administration (FAA).